Highly Recommended by Outdoor Explorers - WIFI Wildlife Scouting Cam Instruction Book This is the newest scouting camera which is designed for activity and is resistant against water and snow. It is equipped with built-in infrared sensor, so that it can be triggered accurately by heat sources, then take high quality pictures or videos. Please refer to the notes below to ensure that you are completely satisfied with this product.
Quick Start Features 1.Wifi funcation, you can preview, download, delete, take photo/video, change settings, check battery and memory capacity in APP. 2.During day, sharp and clear images and during night, clear black and white image. ※ Move the latch and open the camera case ※ Load 8 lithium AA(non-rechargeable) or alkaline AA batteries ※ Insert the SD card ※ Switch to the SETUP Mode. ※ Press " UP/DOWN " key to select Video/camera 3.Impressively quick trigger time 0.4S. Mode 4.
Notes Before Use 1. When setting camera parameters, please put camera in Setup mode. 2. To replace the battery, SD card, firstly turn camera to OFF mode. 3. Color of Indicator 1) When camera is updating firmware, indicator light flashes green. 2) The indicator light flashes red when it is turned on or ready for operation. 3) low battery, the indicator light flashes blue. 4) long standby time, the indicator flashes purple. 5. Batteries need to use dry batteries, do not use rechargeable batteries. 6.
View Drawings KEEPTIME 4
Camera Overview Display screen load battery IR LED Latch Lens LED indicator DC port DC in jack PIR Sensor KEEPTIME 5
Standard Accessories 1× Belt USB 1× 1× Case 1× Manual Other Accessories (not included) 1× Security Case 1× External battery connection wire KEEPTIME 1× Cradle Head 1× solar panel 6
Power Supply After opening the latch on the right side of the camera, you will see that it has 8 battery slots. Please use 8 lithium AA or alkaline AA batteries. Please be sure to insert each battery with correct polarity (negative or“flat”end against the long spring of each battery slot). SD Card Insert the SD card before beginning to operate the camera. SD card is supported up to maximum 64GB capacity.
Operational Modes The cam has two basic operational modes: 「OFF」, 「ON」 ●「OFF 」Mode When cam is in OFF mode, you can do the following: • Replacing the SD card or batteries • Connecting cam with other device by USB port It will occur a little of power consumption under OFF mode. If you won't use it for a long time, please take batteries off. ●「ON」Mode In the ON mode you can check and change the settings of the cam with the help of built-in LCD.
Setting Mode: Photo, Video, Photo+Video PIR Interval: Defaulted 30seconds, optional from 10seconds to 60minutes. The camera won't record any image or videos during the selected interval. PIR Sensitivity: High, Medium, Low IR LED: Auto, Super fine, Economy Time Lapse: Off/ON(ptioanl from 5seconds to 24hours) When selected on, the camera will take photo/video automatically in the selected time interval no matter the PIR sensor has detected a motion or not.
Setting Image Size: 2M, 3M, 5M(Recomend), 8M Picture Number: 1-10 photos. Select the number of photos to be taken in succesion.( Available on Photo mode) Shutter speed: 1/30,1/20, 1/15 Video Size: 360P, 480P, 720P, 1080P,1296P Video Length: 5-180 seconds Specify the duration of a video recording when the camera is triggered automatically. Video's recording period won't be limited in Setup mode.
Setting Language: English,French,Spanish, Portuguese, German,Italian, simplified Chinese,Chinese Traditional, Russian, Japanese. Default Setting: Press “OK” to reset the camera to default setting. Format: Press”OK” to format the SD card, all file will be delected by formating.
Setting Bluetooth: OFF/ON WIFI SSID: The name can be a combination of 10 digits, 26 big letters and 26 small letters. eg: KW865WF WIFI Password: User need to input WIFI Password on APP, if he want to connect the mobile phone to camera's wifi hotspot. Auto WIFI Off: 1minute, 2 minutes, 3 minutes If the camera turns on the WIFI hotspot, but mobile phone doesn't connect to the wifi hotspot successfully within selected time, Wifi hotspot will be tured off automatically and camera will return to ON/Setup mode.
Wifi Function WiFi APP connection Please install the APP on your smart phone device before using WIFI function. Please download and install the app from Google Play or App store by searching “Guard wifi”for Android system and iOS system.
Wifi Function Connect the bluetooth Slide camera's mode switch to ON, and then click the APP(Guard wifi) on your mobile phone and enter STEP 1 as below picture.
Wifi Function 1. Click “LOCAL ALBUM “, user can view, share, edit the pictures/video which download before. 2. Click “OPEN BLUETOOTH”, the APP will enter “STEP 2”and search Bluetooth device automatically. 3. The searched Bluetooth devices will display under the “Device list”as below picture.
Wifi Function 4. Click the appropriate Bluetooth device, APP will connect with the camera's bluetooth and shows “connecting...Keepway, Please wait...”.If connect success, APP will enter “Step 3”as below picture.
Wifi Function 5. You can click “Rename Bluetooth”to rename the bluetooth name (P-1), click “OK”to save new name.
Wifi Function 6. Click “WiFi Setting”, camera will receive a command to turn on Wifi Hotspot and LCD will show as below picture(P-3), in the meanwhile, app will switch to Wifi Setting as below picture(P-4), connect with the Hotspot and enter password which shows on the LCD.
Wifi Function 7.
Wifi Function Icons' functions in APP interface: 1 Icon Funcation Switch to video mode Switch to camera mode Review pictures/Videos in camera Take picture/video by APP Setting camera's system by APP Exit the APP, mobile phone will disconnect with the camera, and camera will enter into ON mode.
Wifi Function 1. Click the icon to enter album as below picrure.
Wifi Function Icon function Back Select the pictures/videos and click this icon to download pictures/video Select the pictures/videos and click this icon to delect pictures/videos. Note: Pictures/video can not be recovered after delete. Select all pictures/video. Switch between picture and video.
Wifi Function 2.Click the icon to enter setting menu as below, you can set the camera's system here.
Wifi Function Exit WIFI 1. Click the “Exit”in APP to disconnect WiFi, after disconnect, camera will auotomatically return to ON mode. 2. Press LEFT button on camera to Exit WiFi, then camera will enter setup mode or ON mode. 3. When the phone is far away from the camera more than 20m, Wifi will disconnect and camera will return to ON mode.
MOUNTING and POSITIONING Mounting Optimum height：5-6.5 inch（1.5-2 m） Optimum distance：60inch（9m）- 10inch（3m） There are two ways to mount cam: using the provided adjustable web belt, or the tripod socket. •Using the adjustable web belt: Push one end of the belt through the two brackets on the back of cam. Thread the end of the strap through the buckle. Fasten the belt securely around the tree trunk by pulling the end of the strap firmly so there is no slack left.
Specification Max image size 30MP Lens f=7.36mm F/NO:2.8 FOV=55°; Auto IR-Cut-Remove (at night) IR-Flash Range High Power LED : 4LEDS; 850nm: 30m; 940nm: 25m; Display Screen 2.4" LCD ;Mobile APP(apple store and google play download) Memory Card SD or SDHC Card, up to 64GB Image Size 30MP Resolution Video Size 1080P，1280*720 HD with Sound（MJPG) PIR Sensitivity PIR with 4 sensitivity levels:High/ Normal/ Low/Auto, Detection Range 25m Operation Day/Night Response Time Picture trigger: 0.
Specification Stand-by Current <75uA Power Consumption <140mA(500mA when IR-LED Lighted) Timed Scan programmable Temperature Display programmable Camera Name Input Moon Display programmable Audio Video programmable User Interface Mobile APP(apple store and google play download) Interface USB;SD card; Security Strap;1/4-20 attachment Size 80mmx98mmx50mm Operating Temperature -20℃ to 60℃ Operating Humidity 5%-90% Security Authentication FCC/CE/RoHs/WEEE Waterproof IP67 KEEPTIME
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Warranty Card Warranty Warranty State Model During warranty, hardware failure occurring, which Serial No. caused by product itself, we will provide free Date of Purchase maintenance service for the customer. Free warranty Your Name should offer this warranty card, please take care of is for the first year. If there is a need for repair, you this card. Address Tel No.
