Instruction Manual

Tianjin Keepsens Information Technology Co., Ltd.
3
 1.8 m herringbone ladder
 Cross screwdriver and pincer pliers
2.2 Host
2.2.1 List for installation materials
1 piece of host equipment, 2 mounting brackets, 4 screws, 8 nuts, 8 gaskets and 8 spring washers.
2.2.2 Installation steps
1) Insert the stud for mounting bracket into the positioning hole shown in Figure 2-1a from the
back of the host with effect shown in Figure 2-1d
Figure 2-1a Host Location Hole
Figure 2-1b Mounting Bracket
Figure 2-1c Inserting Bracket
Figure 2-1d Bracket Placement Effect
2) Remove the release paper on the mounting bracket, install the host and mounting bracket into
the groove on the left of the container ventilation opening, and carry out gent pressing to make the