Instruction Manual

Tianjin Keepsens Information Technology Co., Ltd.
2
1 Overview:
Dear users, thank you for using our products; To enable you to be familiar with the product faster,
refer to the document description if you have any question. The description about technical
parameters and the direction for use of the wide area locator are mainly introduced in the
document, and the users can quickly understand how to use the product by the picture instruction
information. When you encounter an unsolvable problem in the use process, contact our
company's technical personnel. Thank you for your trust.
Note:
The information applies to the following models: Standard container locator;
The illustrations in the information may be different from the product. The material object shall
prevail.
2 Installation instruction
The installation instructions cover host, no-load/heavy load sensor and door opening/closing
sensor.
2.1 Tools and materials
The required articles are installed as follows:
 CS1000 equipment (host, no-load/heavy load sensor and door opening/closing sensor).
 Host mounting bracket.
 Electric drill and 3.2mm/4.5mm drill
 Chamfering bit with diameter being 2cm
 M4 self drilling tapping screw
 Marking pen
 Length of M4 sunk phillips screw: 16mm.
 M4 nut
 M4 gasket and spring washer.
 Scouring pad or towel
 White silicone sealant XD-6120