Instruction Manual

Tianjin Keepsens Information Technology Co., Ltd.
8
4) Click [Choose the Subordinate Machine To Be Bound].
List of host scanning
My equipment
Unbinding
Setting of subordinate machine
Get close to the subordinate machine and keep
RSS＞-60
Setting
Choose the subordinate machine to be
bound
Figure 3-3 List of Host Scanning
Figure 3-4 Subordinate Machine Setting
5) The mobile phone shall be close to the no-load/heavy load sensor and (or) door opening/closing
sensor to be bound, and tick the bluetooth number of the sensor equipment to be bound from the
list of subordinate machine scanning. A no-load/heavy load sensor and a door opening/closing
sensor are chosen at the same time in this case. Click [Next Step] after selection; It means the
binding of host equipment and sensor equipment is completed after the "successful binding" arises
in the lower part of the screen.
The display interface in each step of the binding operation is listed from Figure 3-2 to Figure 3-6.
List of subordinate machine scanning
Stop screening
My equipment
Next step
Setting of subordinate machine
Get close to the subordinate machine and keep
RSS
＞
-60
Setting
Start to bind the BLE equipment