Tianjin Keepsens Information Technology Co., Ltd. Document No.: Confidentiality level: Version: Stage mark: Number of pages: Installation instructions of wide area locator Prepared by MM/DD/YY Reviewed by MM/DD/YY Approved by MM/DD/YY Tianjin Keepsens Information Technology Co., Ltd.
Tianjin Keepsens Information Technology Co., Ltd. Abstract: Operating Manual for Container Positioning System Change order No.
Tianjin Keepsens Information Technology Co., Ltd. Contents Legal statement: .............................................................................................................................. 11 Overview: ...................................................................................................................................... 22 Installation instructions .............................................................................................................. 2 2.
Tianjin Keepsens Information Technology Co., Ltd. Legal statement: The document belongs to Tianjin Keepsens Information Technology Co., Ltd. and is protected by applicable copyright laws and international treaties. Other name subject to copyright protection used are the property of respective owner. Therefore, you must treat the document like any other copyrighted material. Without prior written permission of Tianjin Keepsens Information Technology Co., Ltd.
Tianjin Keepsens Information Technology Co., Ltd. 1 Overview: Dear users, thank you for using our products; To enable you to be familiar with the product faster, refer to the document description if you have any question. The description about technical parameters and the direction for use of the wide area locator are mainly introduced in the document, and the users can quickly understand how to use the product by the picture instruction information.
Tianjin Keepsens Information Technology Co., Ltd. 1.8 m herringbone ladder Cross screwdriver and pincer pliers 2.2 Host 2.2.1 List for installation materials 1 piece of host equipment, 2 mounting brackets, 4 screws, 8 nuts, 8 gaskets and 8 spring washers. 2.2.
Tianjin Keepsens Information Technology Co., Ltd. mounting bracket to the container wall. The distance between the upper side of the host and the upper edge of the container is about 15cm, as shown in figure 2-2b, the solar panel and equipment marks face the outside of the container, and the equipment mark is under the solar panel. Note: Ensure that the surface of the host is clean and dry, and the scouring pad or towel can be used for cleaning when necessary.
Tianjin Keepsens Information Technology Co., Ltd. Figure 2-3 Bracket Drilling Position Figure 2-4 Drilling Position of Chamfering Bit 5) The Φ4.5 drill is used to drill holes at the location hole marked by Step 3), as shown in Figure 2-5. Note: Don't directly drill a hole by the mounting bracket.
Tianjin Keepsens Information Technology Co., Ltd. Figure 2-6c Indication for Applying the Sealant 7) Hang the host equipment onto the mounting bracket stud anew, harness the gasket and spring washer onto the stud successively and use the nut for fixation, as shown in Figure 2-7. The host equipment installation is completed. The installation effect is shown in Figure 2-9. Note: The position shall be consistent with that in Step 2) when being hung to the host anew.
Tianjin Keepsens Information Technology Co., Ltd. Figure 2-8 Installation Effect for the Host 3 Description about equipment binding and unbinding operation 3.1 Binding of host equipment and sensor equipment 1) Enable the APP Tianjin Keepsens multi-machine configuration tool with the loading interface shown in Figure 3-1.
Tianjin Keepsens Information Technology Co., Ltd. 4) Click [Choose the Subordinate Machine To Be Bound].
Tianjin Keepsens Information Technology Co., Ltd. Successful binding Figure 3-5 List of Subordinate Machine Scanning Figure 3-6 Successful Binding 3.2 Unbinding of host equipment and sensor equipment Execute Step I and Step II in the host equipment and sensor equipment binding, and click the [Unbinding] Button near the host equipment bluetooth number to be unbound in the list of host scanning.
Tianjin Keepsens Information Technology Co., Ltd. Figure 3-7 Successful Contact Binding 15.21NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. １５．１０5ＮOTEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Tianjin Keepsens Information Technology Co., Ltd. Declaration of Conformity Hereby, [Tianjin Keepsens Information Technology Co., Ltd.] declares that the radio equipment type [Wide area locator，KP-CCXG700] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.keepsens.
