User's Manual

20
③ The user can push the robot to the location of charging pile manually.
④ Align the back of robot with the charging pile, then push the robot onto
the charging pile, making the automatic recharging port at the bottom of
robot contact with the contact plate of charging pile.
⑤After the contact is successful, the page will display the successful
connection, and the charging can be started.
*Note:
Both the 2nd and 3rd points mentioned above need to be equipped with a charging
pile. Favorable energization and correct connection between robot and charging
pile shall be guaranteed. Please pay attention to the hidden safety hazards caused
by undesirable operations.