User's Manual

14
page will be displayed.
③ Slide the page upward, find and click [Automatic Recharging Electric
Quantity].
④Input the numerical value, and save it.
Within the working period, when the operating electric quantity of the
robot is lower than the [Automatic Recharging Electric Quantity], the robot
will arrive at the designated charging pile for charging automatically; if the
administrator cancels during charging, when the operating electric quantity is
lower than the [Minimum Electricity Consumption], the robot will stop
operating and trigger the automatic recharging.
The operation steps for the automatic recharging working time setup of the
robot are as follows:
The robot has the intelligent automatic recharging function, and users
can set the working time of the robot in the PEANUT APP:
① Enter the user setup page and find [Charging Setup]; or enter the super
setup page and find [Power Management].
② Find the “Working Period” function setup column.
③ Click the working period adding button, and the time setup interface will
pop up.
④ Slide up and down in the pop-up window of time selector, select the start
time and end time separately, and then confirm.
⑤ If the start time and end time are changed, click the displayed time once
again (e.g. 9:00); and it is allowed to add multiple working periods, but not