User's Manual

1. Connect the Wi-Fi

When the robot is used for the first time, please connect the robot to the

network via Wi-Fi, and the setup steps are as follows:

① Enter the user setup page, or enter the super setup page, and find [Wi-Fi

Network];

② Start the WLAN (Wi-Fi) function of the system, and search for the

available Wi-Fi.

③ Select the available Wi-Fi, and enter the password.

④ Click the [Connect] button until the Wi-Fi connection is successful.

2. Charging Setup

*The operation steps for the setup of [Minimum Electricity Consumption] of

the robot are as follows:

① Enter the super setup page.

② Click the [Power Management] menu and the power management setup

page will be displayed.

③ Slide the page upward, find and click [Minimum Electricity

Consumption].

④ Select or input the numerical value, and save it.

Note: If there’s no charging pile, directly skip to [3. Adjust the Volume]

*The operation steps for the setup of [Automatic Recharging Electric

Quantity] of the robot are as follows:

① Enter the super setup page.

② Click the [Power Management] menu, and the power management setup