User's Manual

13
2. Charging Setup
*The operation steps for the setup of [Minimum Electricity Consumption] of
the robot are as follows:
① Enter the super setup page.
② Click the [Power Management] menu and the power management setup
page will be displayed.
③ Slide the page upward, find and click [Minimum Electricity
Consumption].
④ Select or input the numerical value, and save it.
Note: If there’s no charging pile, directly skip to [3. Adjust the Volume]
*The operation steps for the setup of [Automatic Recharging Electric
Quantity] of the robot are as follows:
① Enter the super setup page.
② Click the [Power Management] menu, and the power management setup
page will be displayed.
③ Slide the page upward, find and click [Automatic Recharging Electric
Quantity].
④Input the numerical value, and save it.
Within the working period, when the operating electric quantity of the
robot is lower than the [Automatic Recharging Electric Quantity], the robot
will arrive at the designated charging pile for charging automatically; if the
administrator cancels during charging, when the operating electric quantity is
lower than the [Minimum Electricity Consumption], the robot will stop