Product Manual

1 Setting Up 1
Inserting and setting the blade
The blade is inserted from the back of the blade holder, push it fully forward and
tighten the wingbolt.
To set the blade for a repeatable cutting depth unclamp the blade and turn the knob
at the front of the cutter, clockwise to increase blade depth & counter clockwise to
decrease.
It is essential that the MAX/SIMPLEX is used on a flat surface to cut
accurately. A warped or bowed table top can induce a twist in the
SIMPLEX resulting in a bowed cut.
Only lift or move the SIMPLEX using the grip on the top
edge of the cutter bar. If there is a need to handle the cutter in
any other way or to move it away from its cutting bench, the
blade must
be removed first.
SAFETY
WARNING