Item Brochure

SmartFold Bench
The world’s finest cutting machines
www.keencut.com
[phone] [e-mail]
Scan for further information
https://www.keencut.com/product/smartfold-bench/
Strong, secure and stable
The SmartFold Bench provides the strong and solid foundation required for
precise accurate cutting. The unique patented Proteus construction method
creates a secure and rigid workbench that will not lose any stability over time.
Strength and stability are vital to ensure that you achieve optimum clamping and
repeatable, reliable cutting across the full length of the cutter bar. The Proteus
construction is easy to assemble, and the internal fittings are concealed for a
flush finish and maximum safety under heavy load.
Level surface adjustment
Adjustable feet deliver precise levelling on uneven floors and maintain the
flatness required to obtain precise cutting accuracy.
Worktop options
The SmartFold Bench is supplied without a worktop, giving you the freedom to
choose your own. You can use any suitable sheet material for the worktop,
including glass. You can use standard 1.22m (4′) wide boards to form the
worktop, or 1.525m (5′) wide boards if you fit the cantilever extension. Worktop
dimensions are shown in the table below. They should be 18mm (3/4″) thick in
order to finish flush with the base plate of the Evolution3 SmartFold cutter.
Cantilever extension
Due to the integral strength of the Proteus construction, the SmartFold Bench
can be extended to a 1.525m (5’) width worktop, using a specially designed
cantilever system. The cantilever kit is included as standard. As well as
extending the bench this gives an overhang, under which you can fit a stool or
tall chair for comfortable working and legroom. The cantilever extension is fitted
to the rear, non-cutter edge of the bench. Evolution3 cutters must be fitted to the
front edge which benefits from stronger support and a custom mounting plate for
the cutter.