Product Manual

3.6
Assembly
Fitting the optional free standing kit
1. Attach the bracket to the top of the machine using the nuts and screws (provided with the
main machine).
Extend the telescopic leg to the same length as the front legs less 12cm (5”).
Assistance will be needed for the following stages
2. Get help to stand the machine up and hold it while the free standing leg is xed to the
bracket using the 6mm hexagon wrench.
3. Swing down the stay and attach the xing block to the back of the main body, tighten all
three screw on the stay (using 5mm & 6mm hexagon wrenches).
4. Extend the telescopic leg so the machine stands evenly.
NOTE: The free standing kit is an optional extra and does not come packed with the main
machine.
❶
❷
❸