Product Manual

Evolution3 SmartFold User Guide
The world’s finest cutting machines
www.keencut.com
[phone]
[phone]
[e-mail] (UK HQ)
[e-mail] (US sales)
Scan the QR code or
click here to view this document online >
Page 44 of 48
8.3 Change the plastic cutting strip
When using the Fabric tool head with the purple plastic cutting strip, it will become scored and require
replacing. Adjustment of the cutting pressure to keep it to a minimum for the fabric being cut will help to extend the life of
the strip. Check you have used all four cutting tracks on the strip before proceeding.
Carefully fold the cutter bar over to reveal the base plate. This
may require 2 people.
Be careful when lifting
Both sides of the cutting strip can be used, it is important the
strip is turned over in the correct orientation. The four tracks
are offset to one side so when the strip is turned over correctly
the new set of four tracks do not align with the originals.
The cutting strip is removed by sliding it to the right, to keep the
orientation of the strip correct the left hand end should remain
on the left once turned over.