Product Manual

Evolution3 SmartFold User Guide
The world’s finest cutting machines
www.keencut.com
[phone]
[phone]
[e-mail] (UK HQ)
[e-mail] (US sales)
Scan the QR code or
click here to view this document online >
Page 17 of 48
Insert a Graphik blade, check it is facing the correct way for your
desired direction of cutting. Place the small pin in the hole at the
top of the blade and align with the edge of the clamping plate.
Replace the blade clamping plate onto the blade holder but do
not tighten fully until the blade depth has been set (see how to
adjust the blade depth >).
Repeat on the other blade holder if required.