Product Manual

Evolution3 FreeHand User Guide
The world’s finest cutting machines
www.keencut.com
[phone]
[phone]
[e-mail] (UK HQ)
[e-mail] (US sales)
Scan the QR code or
click here to view this document online >
Page 6 of 43
3. Make your first cut
3.1 Align and clamp the material
IMPORTANT: You must use a cutting mat for any cutting, creasing, or scoring process to prevent damage to the work
surface.
See how to align and clamp the material in this video >
Place the cutting mat (A) on the work surface then the material
to be cut (B) making sure the whole length of the cut line is over
the cutting mat. Place the FreeHand on the material near to the
cutline.
Lift and move one end of the cutter so the sightline strip (clear
plastic strip running along cutting edge of the FreeHand) aligns
with the cut line, then repeat at the other end. Look down
vertically and check the sightline strip aligns with the cut line
before making the cut.
Further cutting information is given in the sections under relevant
tool heads.
See Double Graphik cutting techniques >
See the Fabric tool head cutting techniques >
See the Creaser tool head creasing techniques >
See the Rocker tool head cutting techniques >