Product Manual

Evolution3 FreeHand User Guide
The world’s finest cutting machines
www.keencut.com
[phone]
[phone]
[e-mail] (UK HQ)
[e-mail] (US sales)
Scan the QR code or
click here to view this document online >
Page 42 of 43
Apply the sightline strip in stages from one end of the cutter bar
to the other using the yellow silicone grip as your guide; the back
edge of the sightline strip should be touching the front edge of
the silicone grip.
TIP: Remove the protective backing from the double-sided tape in
stages to prevent complications during application.
Ensure that the sightline strip does not overlap the silicone grip
as this will affect the clamping of the cutter bar.
Apply pressure to the underside of the sightline strip to ensure
the sightline strip is secured in position.
IMPORTANT: When trimming the sightline strip it must be done on a piece of scrap material or cutting mat as the sightline
strip can deflect into the groove.