Product Manual

Evolution3 FreeHand User Guide
The world’s finest cutting machines
www.keencut.com
[phone]
[phone]
[e-mail] (UK HQ)
[e-mail] (US sales)
Scan the QR code or
click here to view this document online >
Page 36 of 43
When cutting thinner / less dense materials, ensure the blade
depth is adjusted so only the tip of the blade is going through the
material. Place your hand on the Rocker tool head as shown and
rock it forward to engage the blade.
With the blade engaged, pull the Rocker tool head in
one continuous motion along the material to achieve the best
results.
If the material creases at the beginning of the cut use the index
finger on your other hand to pinch the material onto the base
plate and hold it in place whilst the blade enters the material.
When cutting thicker / more dense materials, ensure the blade
depth is adjusted so the blade tip cuts 1-2mm (
1
⁄
16
“) through the
material. Place your hand on the Rocker tool head as shown,
press down with your palm to engage the blade.
Push the Rocker tool head slowly through the material.