Product Manual

Evolution3 FreeHand User Guide
The world’s finest cutting machines
www.keencut.com
[phone]
[phone]
[e-mail] (UK HQ)
[e-mail] (US sales)
Scan the QR code or
click here to view this document online >
Page 34 of 43
7.2 Fit or change the Rocker tool head blade
To change the blade, loosen the blade clamping knob.
Remove the magnetic cartridge from the Rocker head.
Place the blade between the two guides, the magnet will hold it
in place, and slide it back to touch the blade depth screw. The
blade depth screw can be adjusted to set the blade correctly for
the thickness of material to be cut.
Place the blade cartridge back into the cutting head, press on
the end of the blade depth screw to ensure it is located fully in
its slot and tighten the blade clamping knob.