Product Manual

Evolution3 FreeHand User Guide
The world’s finest cutting machines
www.keencut.com
[phone]
[phone]
[e-mail] (UK HQ)
[e-mail] (US sales)
Scan the QR code or
click here to view this document online >
Page 20 of 43
Cutting Aluminium Composite Panels is not recommended using the Graphik tool head.
See how to cut ACP with the Rocker tool head >
Thin materials such as paper and plastic films are easily cut but
attention should be given to supporting the material at the
beginning of the cut. Pressing down lightly on the edge of
the material with your index finger or thumb will prevent the
material creasing when the blade starts cutting.
Scoring Acrylic and other plastics can be achieved by setting the
blade at minimum depth and running the blade backwards across
the surface whilst applying firm downward pressure on the blade
holder.
Remove the material from the cutter for snapping by hand, some
plastics may benefit from being scored multiple times.
When cutting a small piece of board place it at one end of the
cutter and place a scrap piece at the other end to keep the cutter
bar parallel to the base.