Product Manual

Evolution3 FreeHand User Guide
The world’s finest cutting machines
www.keencut.com
[phone]
[phone]
[e-mail] (UK HQ)
[e-mail] (US sales)
Scan the QR code or
click here to view this document online >
Page 18 of 43
4.3 Advanced cutting techniques
NOTE: The following is for a right-handed person. For left-handed use cut at the left-hand end of the cutter and reverse the
direction of cut and hand positions. IMPORTANT: You must use a cutting mat for any cutting, creasing, or scoring process
to prevent damage to the work surface
Place the cutting mat (A) on the work surface then the material
to be cut (B) making sure the whole length of the cut line is over
the cutting mat. Place the FreeHand on the material near to the
cutline.
Lift and move one end of the cutter so the sightline strip (clear
plastic strip running along cutting edge of the FreeHand) aligns
with the cut line, then repeat at the other end. Look down
vertically and check the sightline strip aligns with the cut line
before making the cut.