Product Manual

Evolution3 FreeHand User Guide
The world’s finest cutting machines
www.keencut.com
[phone]
[phone]
[e-mail] (UK HQ)
[e-mail] (US sales)
Scan the QR code or
click here to view this document online >
Page 11 of 43
The cutting head can be pulled or pushed to cut the material.
Load and align the material to be cut as described in the
‘clamping material’ section (see how to align and clamp the
material >), press down the chosen blade holder whilst
pushing/pulling the cutting head along the cutter bar.
Tip: Only finger pressure is needed to hold the blade holder
down, if after making the cut the blade holder has risen and the
blade not cut through simply cut again. This could be an
indication the material should be cut in two strokes using
the dual blade depth setting as explained above.