Product Manual

The SABRE HotCut System has been designed to accept:
l Either a hot knife attachment which accepts the HSG-0 heated knife manufactured by
HSGM and will need to be fitted with a Type 'R' blade.
l Or a hot knife attachment which accepts the AZ manufactured TC20 heated knife fitted
with a T 013/45 blade.
1
Cutterbar
Your SABRE HotCut SYSTEM
Cutter - Available in three sizes:
n SHC90 Sabre HotCut System 90cm - 36” cut length
n SHC190 Sabre HotCut System 190cm - 75” cut length
n SHC290 Sabre HotCut System 290cm - 115” cut length
You should have:
Self-adhesive Silicon Cutting Strip
5mm Allen key
4mm Allen key
2mm Allen key
A Heat Resistant Silicon strip is included that can be applied to the surface of a
strip of a heat resistant material to provide a cutting surface. MDF, Hardboard or
Aluminium Composite (such as Dibond) all work well. For long term consistent
use we recommend cutting directly onto 6mm (1/4") toughened/tempered glass.
5
Base
7
Hot Knife Holder for HSG-0*
8
Type R Hot Blade*
NOTE: The Hot Knife its holder and blade are not included.
NOTE: Other blades recommended by the heated knife manufacturers can be used providing they are
of a suitable length and shape.
Type T 013/45 Blade*
2
6
HSG-0 Hot Knife*
4
Hot Knife Holder for AZ TC20*
3
AZ TC20 Hot Knife*
* (NOT INCLUDED)
!