Product Manual

Installation Guide

3.1 Packing List

Unpacking your machine:

1. Roll Wedges

2. Roll Ramp

3. Parts Hardware Packet

4. Media Tray

5. Ergonomic Pull Bar

6. Rubber Sleeves

7. 4 M6 x 19mm Bolts installed on Carriage Support Frame

8. Carriage Support frame and lifter carriage

You will need: 10mm wrench & Phillips head screwdriver

5mm Allen Key 1

Split Washers 12

Phillips Head 12

Bolts

Nuts 12

Washers 12

You will nd the installation hardware

contained in a packet with the unit. Check

to make sure you have all these parts.

Part Description Quantity

PARTS INCLUDED

HARDWARE PACKET