Product Manual

8
Operation
4.1 How to use the brakes
The Lifter is equipped with 2 brakes.
1. To engage the brake, press both the
brake pedals with your foot.
2. To release the brake, lift up the brake
pedals with your foot.
4.2 Using the roll ramp and wedges
The On-a-Roll Lifter® Universal is designed to work with a variety of printers and roll
diameters. To help determine the best position of roll wedges:
1. Line up the pegs on the roll wedges with the holes located on the tray.
2. The roll wedges can be positioned in desired location depending on where the roll
needs to be placed for loading and unloading.
3. Ensure the roll wedges are lined up in the correct hole position on both sides.
4. When using the roll ramp, line up the pegs on the roll ramp with the rst set of
holes on the media tray towards the front of the lifter.
5. When roll ramp is not in use it can be safely stored on the lifter on the storage
tabs located on the back of the lifter.
Locks shown on the Caster
Wheels in the unlock position.
Roll wedges are easily repositioned to
t the roll and printer. Removable roll
ramp permits easily loading rolls.
Foster Keencut
Safely store roll ramp on
the hooks located on
the back of the lifter.