Product Manual

6
Operation
3.3 Lifting the tray
Warning: Do not overload the load tray. The load must be evenly distributed on the
Load Tray surface so that it does not tilt forward or sideways. The parking brakes
should be engaged whenever the On-A-Roll Lifter® is being loaded or unloaded.
1. To raise the load tray, push the
release lever down.
2. Pump the handle up and
down or pump the lift
pedal with your foot.
3. Press the lift pedal or hand
pump until the load tray
reaches the desired
height. The load tray can
be raised up to 865 mm
(34”) for precise
unloading.
3.5 Maneuvering with heavy rolls
1. To adjust the direction of the wheels and ensure smooth rolling action on heavy
loads, exert force on the handle.
3.4 Lowering the tray
Warning: do not put any part of the body under the Load Tray. The parking brakes
should be engaged whenever the On-A-Roll Lifter® is being loaded or unloaded.
1. To lower the load tray, stand behind
the On-A-Roll Lifter®.
2. Find the release lever and lower the
load tray by pulling the release lever
past the neutral position.
3. Do not open lower too quickly, as this
creates a dangerous work environment.
Release
Lever
Lift Pedal
Handle
Pump
Lower
Neutral
Lift