Product Manual

You will
need
3mm
■ REMOVING THE START OF CUT RULE
 Loosen screw with 3mm hexagon wrench.
 Set the Vertical Blade Holder in the down position and loosen the second screw.
Remove the rule from the end of the Cutter Head.
If the machine is to be used without the Start of Cut Rule for any reason adjust both screws inwards to ensure they
do not interfere with the Vertical Blade Holder.
Removing the Start of Cut Rule
English


KEY:

Cutter Head  Vertical Blade Holder
5.3 Maintenance 5.3
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920