Product Manual

➤
➤
18cm (7")
43.5cm (17
1
/
8
")
2.3 Before Set Up 2.3
SET OUT THE FIXING BRACKETS
Place a Bracket 18cm (7") from the end of the pencil line as shown, ensuring that the
groove in the centre of the Bracket is aligned with the pencil line and fix to the worktop
using two short screws "
D" provided. Fix the remaining brackets accurately along the
line leaving a 43.5cm (17
1
/8") gap between each one. Check that the brackets are all
aligned correctly and if not remove the incorrectly positioned bracket and replace slightly
to one side of the original position to create new screw holes.
43.5cm (17
1
/8") 43.5cm (17
1
/8")43.5cm (17
1
/8")
18cm
(7")
● Example:
Evolution 160, 4 base fixing brackets
1234
Evolution E2 160cm (64”)
D x 2