Product Manual

3.6 Assembly 3.6

Fitting the Free Standing Kit (optional 165 only)

NOTE: The Free standing kit is an optional extra and does not come packed

with the main machine.

Assistance will be needed to fit the Free Standing Kit

1. Extend the telescopic leg to the same length as the front legs less 12cm (5")

2. Get help to hold the machine vertical and attach the bracket to the top of the

machine using the nuts and screws provided.

3. Swing down the stay and attach the fixing block to the plate on the bottom of the

Main Body, tighten all three screws on the stay.

4. Adjust the telescopic leg so the machine stands evenly as shown.

5. Secure the top of the Legs to the Main Body by fitting the two M8 screws (supplied

separately) through the black plate into the back of each of the Legs, tighten these

together with the adjacent two screws (four screws in all) to fix the Legs in position.