Users Manual

5
second.
If yes, then click
next step to go to the next step.
If not, please long press the
Wi-Fi Settings button for 5 seconds until
you hear a beep. After a few seconds, the feeder's indicator LED will
flash RED rapidly.
Wi-Fi Indicator status:
Flashing rapidly in RED Feeder is waiting for Wi-Fi network
configuration; it is in QR code mode and
auto scan mode.
Flashing slowly in RED Feeder is waiting for Wi-Fi network
configuration; it is in AP mode.
Always on in RED Feeder is configured for the Wi-Fi network
and trying to connect. If the connection
fails, it will always be red.
Always on in GREEN Feeder is connected to the Wi-Fi network. It
can be turned off in the settings.
Notice: When the feeder is only powered by batteries, the power
indicator and Wi-Fi indicator will turn off.
Flashing RED rapidly Long press