Users Manual

1
Hardware Installation and Introduction
1. Open the battery compartment at the bottom of the feeder, insert the
Micro USB power cord into the connector at the bottom; and extend
the power cord out along the designed wire guide. You can also insert
3 pieces of D cell batteries which will enable the feeder to work
automatically according to your scheduled feeding plan even without
an external power supply. Turn on the power switch.

2. Rotate the knob on the top cover. The feeding tray is in the grain
bucket. Place the feeding tray into the feeder from the front, then pour
pet food into the feeder.
OFF
ON
Power
switch