Users Manual

8
8. The App will be then directed to the video interface for the pet feeder.
Notice:
a. The WLAN signal shows on video is only for checking the internal
network's status. It does not represent the internet connection's
status.
b. To enable certain functions, the App needs to obtain corresponding
permissions on the phone. Please allow them when prompted.
Add pet feeder via AP mode
1. If the feeder fails to connect to the Wi-Fi network, the AP mode is plan
B for adding the feeder.
Choose
AP Mode manually in the adding process.
Check that the Wi-Fi indicator LED is flashing RED once every 3 seconds.
Then click
next step.
If the indicator is in another status, please long press the Wi-Fi button
for 3 seconds until you hear a beep to switch Wi-Fi indicator's flashing
status to flashing rapidly. Then long press the Wi-Fi button again to
Full screen
WLAN signa
l
Advanced settings
Record to phone
Set up feeding plan
Speak to pet feeder
Play videos back in SD card
Take snapshot to phone
Check snapshots and
video records in phone;
only available
for
android phones.
Listen to feeder
Switch video resolution