User manual

Important information
5 / 20
1 Important information
1.1 Safety instructions
!
WARNING!
Not observing the safety instructions can result in risk of death, injuries and dam-
age to the device! KEBA AG assumes no liability for claims resulting from this!
 Electrical hazard!
The installation, commissioning and maintenance of the charging station may
only be performed by correctly trained, qualified and authorized electricians
1
who are fully responsible for the compliance with existing standards and in-
stallation regulations. For details, see "KeContact P20 Installation manual (for
the specialist)".
 Electrical hazard / fire hazard!
Never use damaged, worn or dirty charging plugs.
 The owner must ensure that the charging station is only ever operated in per-
fect condition:
- The charging station must be checked regularly for faulty sockets and con-
nectors and damage to the housing (visual inspection).
- A damaged charging station must be switched off immediately and replaced.
- Repair work to the charging station is not permitted and may only be per-
formed by the manufacturer (replacement of the charging station)!
- Do not carry out any unauthorized conversion work or modifications to the
charging station!
- Do not remove any notices on the device, such as safety symbols, warning
notices, rating plates, nameplates or cable markings!
 The charging station does not have its own power switch! The RCD circuit
breaker and the line circuit breaker of the building installation serve as mains
disconnector.
 No extension cables are permitted for connecting an electric vehicle to the
power supply device for electric vehicles.
Only electrical vehicles or their chargers may be connected. No connection of
other loads is permitted (electric tools etc.)!
 Read the information and instructions for your vehicle carefully before you
charge the vehicle using the charging station.
Ventilation:
A number of vehicles require an external ventilation system in the interior are-
as due to the possible creation of toxic or explosive gases during the charging
procedure.
1
Persons who, due to their special training, expertise and experience as well as knowledge of current standards, are
able to assess the work performed and the possible hazards.