User manual

Using the charging station
16 / 20
Inserting the cylinder lock
Inserting the cylinder lock
► Turn the key 180° so that the lock nose
faces downwards.
► Use light pressure to press the cylinder
lock into the housing completely until it
audibly engages.
The cylinder lock should be flush with the
surface of the housing.
Engaging the cylinder lock
Engaging the cylinder lock
► Turn the key to the right until the
resistances are noticeably overcome and
the key can be removed.
Do not turn the key past the [MAX]
position.
The key switch is now ready for use.
Removing the cylinder lock
Removing the cylinder lock
Removing the cylinder lock
► Turn the key to the left until the
resistances are noticeably overcome.
Turn the key further until it is located in
the vertical position.
► The cylinder lock can now be unlocked
from the holder using slightly increased
force and removed.