User manual

Using the charging station
12 / 20
3.3 Status LED
Status LED – segments
Status LED - segments
The status LED provides information about the
current operating state of the charging station
and consists of 4 segments (S1 to S4) which
can light up together or individually.
All segments can light up or flash in different
colors.
If not otherwise specified, all 4 segments light
up together.
Status LED
Function
Flashes
slowly every
3 seconds
green
Ready for operation (charging cable is not yet plugged in on both sides;
optional: The charging station was authorized correctly by key switch or
RFID card)
blue
Authorization is required (charging station has not been authorized cor-
rectly yet; authorization with RFID, key switch or external enable required)
Lights up
continuously
green
Ready for charging (charging cable is plugged in on both sides and
locked)
blue
Ready for charging with ISO15118 (charging cable is plugged in on both
sides and locked)
External enable still required (authorization with RFID or key switch car-
ried out; vehicle connected correctly; external enable on the enable input
still necessary)
Flashes
every sec-
ond
green
Charging procedure is carried out (applies for "EN 61851 Mode 3" charg-
ing procedure)
blue
Charging procedure is carried out (applies for "ISO15118" charging proce-
dure)
Lights up orange briefly
after plugging in
Wait for locking (charging cable was plugged in and the system attempts
to lock the plug)
Green LED goes out
briefly every 3 seconds
Wait for unplugging (charging procedure complete, vehicle unplugged)