Technical Description

Introduction XE 020
1 Introduction
1.1 Purpose of the document
This planning manual describes the RFID XE 020/A module and the
XE 020/ANT antenna module, which are already permanently installed in
different KEBA operating panels. The application and functionality of the
RFID module is the same for each operating panel.
1.2 Audience and prerequisites
The planning manual is geared towards those who are using or intend to
deploy an operating panel with RFID module.
Only electrical technicians who are qualified to the VDE 1000-10 standard
are permitted to install and maintain the operating panel.
This means personnel who:
l can evaluate the work to be carried out and recognise the possible
hazards based on their technical training, knowledge and experience
plus their expertise in the applicable standards.
l have a level of knowledge equivalent to that obtained through
professional training as a result of several years experience working in
a similar field.
1.3 Intended use
The intended use of the XE 020 RFID module includes deployment in
KEBA operating panels. The module can also be installed in third party
devices provided chapter "Minimum XE 020/ANT antenna module
clearance" is taken into consideration.
The XE 020/A RFID (Radio Frequency Identification) module is used in
conjunction with an RFID card for contactless logon and logoff (as per ISO
15693) and is employed for user identification. This replaces the login of a
user with username and password.
The RFID module may not be used to fulfil protection requirements in the
area of personal safety to prevent a malfunction compromising personal
safety.