Technical Description

Relevant EC directives and applicable standards XE 020
11 Relevant EC directives and applicable standards
11.1 EC directives
99/5/EG R&TTE directive
11.2 Standards
The following non-legally binding European standards are used to validate
the RFID module's conformance to the directives.
11.2.1 Validating conformance to the R&TTE directive
Personal safety: EN 50364:2001
Radio sector: EN 300330-2 V1.3.1, Class 3 receiver
Class 1 as per 2000/299/EG
EMC sector: EN 301489-3 V1.4.1
Electrical safety: EN 60950-1:2001+A11:2004
11.2.2 Other standards
In addition the following non-legally binding standards provide advice in
some areas:
Environmental conditions
EN 61131-2:2003 Programmable logic controller - part 2 Equipment requirements and tests
11.2.3 USA standards
FCC Part 15 Radio Frequency Devices
The device complies with Part 15 of the FCC Rules. Operation in subject to
the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including in-
terference that may cause undesired operation.
This device is labelled with an FCC ID number.
If this label is not visible when installed in an end device, the outside of the
device MUST also display a label referring to the enclosed module.
e.g.
"Contains FCC ID: U870001"
(KEBA Product XE020/A; XE020/B)
Information
- No other antennas except the one provided by KEBA shall be used.
- Changes or modifications not expressly approved by KEBA could void the
user's authority to operate the equipment.