Users Manual

WAL - Work Area Limitation Module Introduction
1 Introduction
1.1 Purpose of the document
This manual describes the WAL module, which is already permanently
installed in different KEBA products like the handheld terminal KeTop T15x
Wireless and the corresponding CB4xx. The application and functionality of
the WAL R1 module is the same for each KEBA product. It is used for
wireless operation area monitoring.
1.2 Audience and prerequisites
The manual is geared towards those who are using or intend to deploy an
KEBA product with the work area limitation WAL module.
Only electrical technicians who are qualified to the VDE 1000-10 standard
are permitted to install and maintain it.
This means personnel who:
⚫ can evaluate the work to be carried out and recognise the possible
hazards based on their technical training, knowledge and experience
plus their expertise in the applicable standards.
⚫ have a level of knowledge equivalent to that obtained through
professional training as a result of several years experience working in
a similar field.
1.3 Intended use
The intended use of the WAL module includes deployment in KEBA
products.
The WAL module (Work Area Limitation) is used to limit the area in which a
wireless handheld terminal can be used. Therefore it has to be used in
conjunction with a base station (e.g. CB4xx) which includes the counterpart
WAL module.
The WAL module may not be used to fulfil protection requirements in the
area of personal safety to prevent a malfunction compromising personal
safety.