Operating & Programming Instructions IM-2000™ 8 Product Cooking Controller THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED.
NOTE: Not all features are available on all models. TABLE OF CONTENTS Introduction.....................................................................................................................................................2 Controller Key Descriptions ..............................................................................................................................3 Operating the Controller..................................................................................................
IM-2000™ CONTROLLER KEY DESCRIPTIONS When lit (bright) indicates that a product hold time is being tracked. When lit (bright) indicates the controller is calling for heat. When lit (bright) indicates the controller is in melt cycle. When lit (bright) indicates the controller is in program mode. IM-2000™ ON OFF Optional “soft” ON/ OFF key switches controller functions off while leaving power to the appliance on. In “operating” mode, allows access to the programming mode.
NOTE: Not all features are available on all models. OPERATING THE CONTROLLER Starting a Cook Cycle To start a cook cycle, simply press the product key for the product you wish to cook. If the product key is programmed, the correct cooking time will be displayed (example) and this time will immediately start to count down in minutes and seconds. The pressure solenoid will also close if programmed to do so. If is displayed immediately and the unit starts to signal, the key being operated is not programmed.
IM-2000™ OPERATING THE CONTROLLER Holding Timers, continued To cancel, press the key. To view the hold time with the least amount of time remaining, press the key. Boil CAUTION: PLEASE CONSULT AND FOLLOW KEATING’S GUIDELINES FOR CLEANING AND BOILING OF THE FRY VATS. The boil function accurately maintains the fryer temperature at 190°F (88°C) to assist in the cleaning of fry vats. To start the boil process, turn the appliance OFF. Empty the fry vat of shortening.
NOTE: Not all features are available on all models. DISPLAY DESCRIPTIONS The unit is in the Operating Mode. The actual vat temperature is more than 10 degrees below the programmed vat temperature. The unit is in the Operating Mode. The actual vat temperature is within the proper cooking temperature range. The vat is ready to start a cook cycle. The unit is in the Operating Mode. The actual vat temperature is more than 40 degrees above the programmed vat temperature. An audible alarm sounds simultaneously.
IM-2000™ CONTROLLER FEATURES Fahrenheit or Celsius Temperature Display The operator will have the ability to configure the controller to display the temperature in degrees Fahrenheit or Celsius from the System Programming mode. Melt Cycle When the computer is ON and the vat temperature is below the Melt Limit Temperature, the controller will control the melting of the shortening. Programmable Times The operator will have the ability to program the cook times for each product key.
NOTE: Not all features are available on all models. PROGRAMMING THE CONTROLLER ☞ PROGRAMMING NOTES: 16 button units have 2 displays that show a full line of information; for example: . 8 button units have a single, dual-purpose display that will alternate information; ☞ for example: (and then) . (This manual shows only 8 button units.) SCAN advances you to the next setting for the same function. ENTER completes programming for that function and advances you to the next function.
IM-2000™ PROGRAMMING THE CONTROLLER Programming Flex or Straight Time Operation Press Display to toggle between choices (See note below before continuing.) Flex or straight time option is now entered. You may now program action alarm times. Programming Action Alarm Times Press Display press any product key currently programmed action alarm time is displayed to change action alarm time THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL IS STRICTLY PROHIBITED.
NOTE: Not all features are available on all models. PROGRAMMING THE CONTROLLER Programming Hold Times Press Display press any product key currently programmed hold time is displayed to change hold time enter a new hold time to keep new hold time NOTE: Up to 4 hold timers can be programmed per product key on the 8 button controller; up to 8 hold timers can be programmed per product key on the 16 button controller.
IM-2000™ PROGRAMMING THE CONTROLLER Entering System Programming Mode Press Display • The controller is now in System Programming Standby Mode.
NOTE: Not all features are available on all models. PROGRAMMING THE CONTROLLER Programming Appliance Type Press Display current appliance type is displayed toggle between three appliance configurations for size of fryer or power type; for example: ELEC — Electric Fryer GAS — Gas Fryer GEN — Generic Option Selected* to keep displayed appliance type; and advance to “Programming Preheat Option” *This display may differ depending on custom configuration of the controller.
IM-2000™ PROGRAMMING THE CONTROLLER Exiting System Programming Press One of these displays will appear. Display The controller is now in Operating Standby Mode. THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL IS STRICTLY PROHIBITED.
NOTE: Not all features are available on all models. NOTES 14 THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN, OR THIS MATERIAL IS STRICTLY PROHIBITED.
IM-2000™ Warranty Statement Patents Keating of Chicago, Inc. provides a limited one-year warranty for its products (except probes and hoses for which the period is 90 days). A copy of the exact provisions of this warranty and the other terms and conditions of sale are available upon request. The products are protected under one or more of the following U.S.
LIMITATIONS OF LIABILITY 100% 80% 60% 40% 20% 10% AND CONDITIONS KEATING OF CHICAGO, INC., 1-800-KEATING KEATING WWW.KEATINGOFCHICAGO.COM REFILE/warranty 8/07 All repair services under this Limited Warranty must be authorized by Keating or performed at Keating. Authorization may be obtained by calling 1-800-KEATING within the Continental United States, Alaska, Hawaii, Puerto Rico and Canada during normal business hours (8 a.m. through 5 p.m. Central Time, Monday through Friday).
IM-2000™ Literature Part #229-51017 Rev. A KEATING OF CHICAGO, INC. 8901 W. 50th Street, McCook, Illinois 60525-6001 Phone: (708) 246-3000 FAX: (708) 246-3100 Toll Free 1-800-KEATING (In U.S. and Canada) www.keatingofchicago.com THE AUTHORIZED USE OR DUPLICATION OF THE SOFTWARE HEREIN, OR THIS MATERIAL, IS STRICTLY PROHIBITED. Specifications subject to change without notice. Printed in the U.S.A.
