User's Manual

Then click on ‘Network’:
Under ‘Wireless Mesh’, select ‘Mesh Enabled’ to ‘Enabled’ and select the wireless channel that is
wanted. Then click on ‘Save’. If not logged in, controller will prompt you for Username and password:
For ‘Username’ enter ‘ke2admin’. For ‘Password’ enter KE2-CaseControl! And click on ‘Login’ Set
point changes should be saved and the wireless radio on the display should be turned on.
The Ethernet display will automatically discover any other Ethernet displays through the wifi. These
controllers can then be bonded and defrost queue as with a LAN connection.
The 4 digit alpha numeric display is used to display all variables and set points of the connected case
controller. The push buttons are used to maneuver through the various displays and to change any set
point of the display case controller.