User's Manual

ManualsBrandsKE2 Therm Solutions ManualsElectronicsKE2 CaseControllerDisplay(Ethernet)

KE2 Case Controller Display (Ethernet)

User Manual

The WiFi radio is normally off. To turn it on, connect the display to a display case controller. You can

connect the controller wired or wirelessly to a LAN or to a wired or wireless device. Once connected,

open a web browser and enter the IP address of the controller. Following is displayed:

To see other views, click on 3 bars in upper left corner:

Click on ‘Set Points’:

Summary of content (4 pages)

PAGE 1
KE2 Case Controller Display (Ethernet) User Manual The WiFi radio is normally off. To turn it on, connect the display to a display case controller. You can connect the controller wired or wirelessly to a LAN or to a wired or wireless device. Once connected, open a web browser and enter the IP address of the controller.
PAGE 2
Then click on ‘Network’: Under ‘Wireless Mesh’, select ‘Mesh Enabled’ to ‘Enabled’ and select the wireless channel that is wanted. Then click on ‘Save’. If not logged in, controller will prompt you for Username and password: For ‘Username’ enter ‘ke2admin’. For ‘Password’ enter KE2-CaseControl! And click on ‘Login’ Set point changes should be saved and the wireless radio on the display should be turned on. The Ethernet display will automatically discover any other Ethernet displays through the wifi.
PAGE 3
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 4
ISED Statement ‐ English: This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B). ‐ French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.