Manual

68
KDS Allegro Peristaltic Pump System User’s Manual
phone [phone] fax [phone]
e-mail [e-mail] web www.kdscientific.com
KD Scientific Allegro Peristaltic Pump System User’s Manual
Publication 5613-004-REV-A
Appendices
U
tilizing the USB Interface
Pin # Signal
1 +5V
2 - Data
3 + Data
4 GND
Mating Face
USB VIRTUAL COMMPORT DRIVER INSTALLATION
When you connect the KDS Allegro Peristaltic Pump
System pump to a computer via USB for the first time,
Windows will seek to install a driver for communication.
The following section details the installation of the Virtual
CommPort Driver supplied with the KDS Allegro
Peristaltic Pump System Pump.
1. Connect the pump to the computer via USB.
Open the control panel and select System and
Security and then System. Click Device
Manager on the left hand menu.
2. Two Flash Update Applications will be
displayed in the device manager, under Other
Devices. Right click on either of the flash
update applications and select Update Driver
Software.