Manual

63
KDS Allegro Peristaltic Pump System User’s Manual
phone [phone] fax [phone]
e-mail [e-mail] web www.kdscientific.com
KD Scientific Allegro Peristaltic Pump System User’s Manual
Publication 5613-004-REV-A
Operating the KDS Allegro Peristaltic Pump System
Run Mode Errors
ERROR 101- Power to the pump was lost.
ERROR 102- The A/D convertor is not working.
Set-up Errors
ERROR 201- Backlight setting out of range, 10 to 100
ERROR 202- Alarm setting out of range, 1 to 99
ERROR 203- Force percentage out of range, 1 to 100.
ERROR 204- Pump address out of range, 0 to 99.
ERROR 205- Pump number out of range, 1 to 99.
ERROR 207- Tubing diameter out of range, 0.1 mm to
99 mm.
ERROR 210- Forward Rate out of range.
ERROR 211- Reverse rate out of range.
ERROR 212- Tubing diameter is out of range.
ERROR 213- Target volume exceeds tubing volume.
ERROR 214- Target time exceeds tubing volume.
ERROR 215- Total volume exceeds tubing capacity.
ERROR 216- Volume is less than the minimum value.
ERROR 217- Motor has stalled.
ERROR 218- Program needs a rate.
ERROR 219- Program needs infuse and withdraw rates
and a target volume.
P
rogram Errors
ERROR 301- Delay time out of range, must be at least
0.20 seconds.
ERROR 302- Number of steps must be between 2 and
500.
ERROR 306- Download to remote pump incomplete.
ERROR 307- Tubing size and flow rate not
compatible, cannot set motor speed.
ERROR 308- File exists.
E
RROR 310- Not all fields have been set.
ERROR 311- Rate is out of range.
ERROR 312- Time is out of range.
ERROR 313- Volume is out of range.
ERROR 314- First rate is out of range.
ERROR 315- Second rate is out of range.
ERROR 316- First time is out of range.
ERROR 317- Second time is out of range.
ERROR 318- First volume is out of range.
ERROR 319- Second volume is out of range.
ERROR 320- The pulse count is 0.
ERROR 321- Bad memory sector in step #%d. Step
was deleted.
ERROR 322- Volume exceeds tubing capacity
in step #%d.
ERROR 323- Incompatible rate vs. tubing size in step
#%d.
ERROR 324- Repeat count is 0.
✐
NOTE: Error and Alarm text are shown in a
yellow box whereas Notice, Confirm and
Verified are shown in a green box.
R
un Mode Errors: Error 1XX
Set-up Errors: Error 2XX
Program Errors: Error 3XX
Critical Errors: Error 4XX
ERROR CODES