Manual

37
KDS Allegro Peristaltic Pump System User’s Manual
phone [phone] fax [phone]
e-mail [e-mail] web www.kdscientific.com
KD Scientific Allegro Peristaltic Pump System User’s Manual
Publication 5613-004-REV-A
Operating the KDS Allegro Peristaltic Pump System
C
reating a Custom New Program
The following flow diagram outlines the basic steps you
will follow to create a new Program:
New User-Defined Program creation workflow
TO CREATE A NEW USER-DEFINED PROGRAM
1. From the Program Configuration or Programs
screen, choose the Program Select button to enter
the Program Selection screen.
2. Select New Program then choose Accept or press
New Program again.
3. On the Program Name screen, type the name of
your Program using the onscreen keyboard.
Choose the Symbols/Numbers button to
display the list of available numbers and symbols
that can be included in the Program Name. To
switch the keyboard back to letters mode, choose
the Letters button (ABC).
4. When you have entered the desired name for your
Program, choose the Accept button to go to the
Program Configuration screen. Your new Program
will now be listed in the Program Name button.
5. Choose the Tubing Select button and complete the
description of the tubing by following the
procedure outlined previously in the Tubing
Selection section of this Guide.
New Program Name Entry screen showing letter keys.
To view numbers/symbols, choose the use button
in the lower left corner