Manual

30
KDS Allegro Peristaltic Pump System User’s Manual
phone [phone] fax [phone]
e-mail [e-mail] web www.kdscientific.com
KD Scientific Allegro Peristaltic Pump System User’s Manual
Publication 5613-004-REV-A
Configuring the KDS Allegro Peristaltic Pump System
R
esume Run on Power Loss
If Resume Run on Power Loss is selected the pump will
power up running when power resumes.
In the Set-up screen,
select
Resume Run After Power Loss
Accept
the changes made and go back
to the previous screen before Set-up mode
was selected.
Cancel and go back to the previous
screen before Set-up mode was selected.
Press Here
Press Here
Setting and Viewing Pump Information
The information on the pump’s parameters are displayed
in the Pump Information Screen.
In the Set-up screen, select
Pump Information
The current information on the pump will be displayed.
• The Model type
• The Software Version
• The Current Pump Address
Accept the changes made by pressing
and go back to the Set-up screen.
Cancel the changes made by pressing
and go back to the Set-up screen.
✐
NOTE: Elapsed Timers and Total Infused
Volume will be reset when power resumes.
Counters and timers information prior to
loss of power are lost
✐
NOTE: This feature will only execute if the
pump is running at the time when power is
lost, and was running with no target set.