User Manual
15
Lock Mode (Child Lock) can be set to prevent accidents caused by unit tampering
by infants or young children.
ةWith the heating unit on, touch the Lock button for 2 seconds to activate lock mode.
تWhen lock mode is activated, none of the buttons of the heating unit will work.
ثTouch the lock button for 2 seconds to deactivate lock mode.
Setting the Lock Mode (Child Lock)
You can adjust the volume of the voice guidance.
ة
By touching the volume button on the boiler control panel, you can select mute and volume
in 1 ~ 3 steps.
تWhen set to 0, the mute lamp is lit.
ث
The setting is completed automatically after 3 seconds after the desired volume level is
displayed as a number.
Setting Mute and Volume
You can sterilize the water inside the pad and the heating unit.
ýCaution ý Please DO NOT use the bed warming mattress pad when the sterilization
mode is active.
Please DO NOT consecutively activate sterilization mode.
Consecutive activation can lead to overheating errors.
Please close the water cap tightly while the sterilization mode is active,
because the water is heated at high temperature.
ةTouch the Sterilization button for 2 seconds to initiate sterilization mode.
The sterilization lamp will light up.
تThe time to completion of sterilization will be displayed on the screen, showing minutes and
seconds remaining.
ثSterilization mode lasts for 30 minutes. Once the sterilization is complete, the heating unit will
automatically turn o.
Setting the Sterilization Mode
The timer can be set for 3 to 12 hours, and the heating unit will automatically power o after
the set time has passed.
ةTouch the timer button and the time will be start to blink on the right screen.
تSet the desired time by touching the "+/-"
ثWhen the desired schedule time is displayed, the setting is completed after 3 seconds and the screen
display changes to the temperature display.
جWhen the timer mode is activated, touch the Timer button again to cancel the timer mode.
Setting the Timer Mode