User Manual
23
Setting the Automatic Temperature Control
Automatic temperature adjustment is an app-specic function that can be set only through
the app. Touch the automatic temperature adjustment tab to go to the setup screen. It can be
set by selecting from basic mode / custom mode. In the automatic temperature adjustment
mode, the temperature cannot be set with the touch button.
1) Default mode
You can set it by selecting the default mode.
ý
The temperature can be set within the appropriate temperature range.
Slim mat type models (EQM5 ** - * S) : 86 ~ 91°F(30 ~ 33°C)
Set the left / right sleep time (5 ~ 10 hours).
ý
Example of Default mode temperature change pattern
E.g.) When the start temperature is set to 39°F(34°C) for 8 hours
2) Personalized mode
Personalized mode can be selected to maintain the
desired temperature for the desired time.
Touch the Left Temperature Time / Right Temperature
Time tab to set the time and temperature.
Touch the + button to add a Personalized mode
section on the Sleep Time Setup screen.
When you touch the Sync button, the sleep time and
temperature will be set equal to the setting value on
the left.
ý The temperature of the Navien Mate can be set within the appropriate sleeping temperature range. If set to
the highest temperature in the appropriate sleeping temperature range, the rst zone (for the rst hour) is
automatically maintained at the maximum temperature without increasing the temperature.
ý Use below 35°C when sleeping or long-term use.
Starting
Temperature
93°F(34°C)
Section 1 starting
temperature
+ 2 degree
E.g.) Apprrox.1 hr /
95
°F(
35
°C)
Section 2 starting
temperature -5 degree
E.g.) Apprrox..3.5 hr / 88
°F(
31
°C)
Section 3 starting
temperature
-2 degree
E.g.) Apprrox..3.5 hr /
91
°F(
33
°C)
< Temperature change graph of Basic Mode >