User Manual
Control Panel Features
14
You can turn the power on and o by touching the power button on the heating unit. The temperature
is set to 95°F(35°C) both on the left and right when the power is rst turned on and the current
temperature is displayed on the Heating unit display window. When power is turned o and restarted,
the temperature is automatically set to the previous operating temperature.
The current temperature is displayed on the left of the display window, and the set temperature is
displayed on the right.
For single size
If the heating unit has not been operated for 30 seconds, it goes into step 1 power saving mode.
(Screen brightness decreases)If the power saving mode is maintained for more than 1 minute,
the power saving mode is entered in step 2 and the "Operation indicator" icon is displayed to
indicate normal operation. This indicator icon will display for sides that are being heated. If only
one side is being heated, the indicator icon will only be displayed on that one side. To resume
control of the heating unit, touch any button to exit power saving mode.
Power saving mode
Power On and O
The heating temperature can be set between 82°F(28°C) through 113°F(45°C). The queen and
king sizes are equipped with dual heating function which can set the left and right temperatures
independently. When setting the temperature above 100°F(38°C), the high temperature entry
mode is applied for safety and the high temperature warning lamp will be lit.
The left and right temperature of the pad can be set in
1
°F
increments with the "+/-" buttons on the
left/right display screen. When the desired temperature is displayed on the screen, setting will be
completed after 3 seconds.
ýSingle size do not have dual heating mode.
ýDual left/right heating is recommended to be used at
95°F
(
35
°C)
or higher.
Setting the left and right temperatures
Setting the Temperature
ة
When the "+" button is pressed when the set temperature is at 99°F(37°C) , " " will be displayed on the screen.
ت
Release the button and wait for a brief moment, the " " indicator and the high temperature caution
lamp will blink. (For about 1.5 seconds)
ث Pressing the + after the brief moment will allow the temperature to be set above 100°F
(
38
°C)
.
If you touch + button again, you can set a high temperature over
100°F
(
38
°C)
.
Turning o heating on one side
Touch the "-" to reduce the temperature past 82
°F
(28
°C
) and " " will be displayed on the screen.
Setting temperatures over 100°F(38°C)