User's Manual

Chapter 8 Restore Factory Defaults

You may restore the Server’s default parameters by one of the following methods.

8.1. Using the Server’s Web Pages

1. Go to the Server’s web page and click CONFIG

2. Enter administrator (default: admin) and password (default: admin).

3. Click Maintenance.

4. Click Factory Default.

5. Click Yes to confirm

8.2. Using Init Button

Turn on server and wait until you can see it on control center, press the initial button over 10 sec. Server

will automatically shutdown and restart, this process will take about 1 and half min , after restart server

will back to factory default.

8.3. Default Parameters List

 General Information

 Server Name: KC601 (for 601) or KC601n (for 601n) or KC604 (for 604) or KC604n (for 604n)

 TCP/IP

 Automatically get IP by DHCP: Enabled

 Static IP: Disabled

 - IP Address: 192.168.1.100

 - Subnet Mask: 255.255.255.0

 User Accounts

 Administrator: admin

 Password: admin