User's Manual

© 2014 KCodes Corporation. All rights reserved. 6 Series v2 User’s Manual V1.0
4.7. Network Scanner
For NetUSB scanning, we recommend you use Network Scanner as the following steps.
1. In the Control Center, click the USB device server that has the desired MFP (or scanner) attached.
2. Click the desired MFP (or scanner).
3. Click the “Network Scanner” button. Then you can see that the Control Center will automatically
do a “connect” operation. The following window will appear.
4. Choose one of TWAIN or WIA item. Click “OK”. The following window will appear.