User's Manual

6. Click the button corresponding to your choice of IP setting methods (static or dynamic using DHCP).

When assigning a static IP address you also have to define Subnet Mask.

7. Click Submit to save your settings. And the Server will reboot. You have now finished the procedure

of setting the IP address.

Chapter 4 Using the USB Device Server

4.1. Introduction

The goal of this produce is to provide the USB device server in a single product. We developed a new

technology called “NetUSB” to achieve this goal. Basically, the “NetUSB” is a “USB over IP” technology

that transparently redirects all USB packets to TCP/IP network channel. “NetUSB” allows you to use USB

devices as if they were connected directly to your PC although they are actually remotely connected to

the 601/601n/604/604n USB device server.

4.2. Connect & Disconnect

“NetUSB” allows you to use USB devices as if they were connected directly to your PC although they are

actually remotely connected to the 601/601n/604/604n USB device server. The “connect” operation is a